*** 24,29 ****
--- 24,40 ----
====
+ libsqlite.a and sqlite.exe may be made for djgpp in a similar way as above. it compiles and works out of the box, with the following limitations:
+
+ 1. temporary filenames are not removed upon close.
+
+ 2. files created by sqlite automatically will be correctly created only if lfn is enabled. otherwise, the database will be read-only. (i couldn't create tables, but i didn't try to insert records in existent ones).
+
+ the diff i'm appending is fixing all the above problems, and makes sqlite function very well on djgpp. beneath there is another djgpp solution, which i think has been already applied.
+
+ my patch applies to sqlite version 2.8.6, and i didn't check any other version.
+
+
To get it compiling on DJGPP (DOS) you need to patch src/os.c with the following (unified diff):
--- ../temp/sqlite/src/os.c 2002-10-20 20:16:50.000000000 +0000
***************
*** 80,526 ****
rc = SQLITE_BUSY;
}else{
+#endif
! rc = SQLITE_OK;
! id->pLock->cnt = 1;
! id->locked = 1;
! @@ -736,9 +744,13 @@
! lock.l_type = F_WRLCK;
! lock.l_whence = SEEK_SET;
! lock.l_start = lock.l_len = 0L;
! +#ifdef __DJGPP__
! + {
! +#else
! if( fcntl(id->fd, F_SETLK, &lock)!=0 ){
! rc = SQLITE_BUSY;
! }else{
! +#endif
! rc = SQLITE_OK;
! id->pLock->cnt = -1;
! id->locked = 1;
! @@ -798,9 +810,13 @@
! lock.l_type = F_UNLCK;
! lock.l_whence = SEEK_SET;
! lock.l_start = lock.l_len = 0L;
! +#ifdef __DJGPP__
! + {
! +#else
! if( fcntl(id->fd, F_SETLK, &lock)!=0 ){
! rc = SQLITE_BUSY;
! }else{
! +#endif
! rc = SQLITE_OK;
! id->pLock->cnt = 0;
! }
!
! This is needed, because files need to be explicitely opened in binary mode and the check for locking always fails in DJGPP.
!
! DJGPP: http://www.delorie.com/djgpp
!
! ====
!
! *Microsoft Visual Studio.NET*
!
! See HowToCompileWithVsNet.
!
! ====
!
! *MSVC and SQLite DLL*
!
! Creation of an import library from the sqlitedll.zip
! (http://www.sqlite.org/sqlitedll.zip) for MS Visual C++
! is achieved by the following command:
!
! LIB /DEF:sqlite.def
!
! This makes the files sqlite.lib and sqlite.exp files.
! The sqlite.lib can then be used to link your programs
! against the SQLite DLL.
!
!
!
! =====
!
!
! *Crosscompile linux x86 -> linux arm*
!
! 1. Install skiff toolchain or similar, make shure you have arm-linux-gcc in your PATH.
!
! 2. Unpack sqlite sources and create a directory _sqlite-arm_ in the same dir.
!
! 3. Edit _configure_ script in the sqlite dir and comment following lines out as shown - have fun finding them ;-)
!
! if test "$cross_compiling" = "yes"; then
! { { echo "$as_me:12710: error: unable to find a compiler for building build tools" >&5
! echo "$as_me: error: unable to find a compiler for building build tools" >&2;}
! { (exit 1); exit 1; }; }
! fi
!
! . . .
!
! else
! test "$cross_compiling" = yes &&
! { { echo "$as_me:13264: error: cannot check for file existence when cross compiling" >&5
! echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
! { (exit 1); exit 1; }; }
!
! . . .
!
! else
! test "$cross_compiling" = yes &&
! { { echo "$as_me:13464: error: cannot check for file existence when cross compiling" >&5
! echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
! { (exit 1); exit 1; }; }
!
! . . .
!
! else
! test "$cross_compiling" = yes &&
! { { echo "$as_me:13490: error: cannot check for file existence when cross compiling" >&5
! echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
! { (exit 1); exit 1; }; }
!
!
! 4. Save the configure script, change into the build directory you created and call the edited configure script from the sqlite directory by using the following option:
!
! ../sqlite/configure --host=arm-linux
!
! 5.
! After that configure should have created a Makefile and a libtool script in your build directory.
! Open the Makefile using your favorite text editor and edit the following line:
!
!
! BCC = arm-linux-gcc -g -O2
!
! to see:
!
! BCC = gcc -g -O2
!
!
! 6. run _make_
! Now you should find a ".libs" directory in your build directory containing sqlite shared object files, like libsqlite.so.
!
! Source (somewhat altered): http://www.kecher.de/howtos/SQLite-JDBC-Howto.html
!
! =====
! *Win32 recompile with mingw32/msys*
!
!
! 1. Download mingw from http://prdownloads.sourceforge.net/mingw/MinGW-2.0.0-3.exe
!
! 2. Download msys from http://prdownloads.sourceforge.net/mingw/MSYS-1.0.8.exe
!
! 3. Install mingw to c:\mingw and msys to c:\mingw
!
! 4. Download the FULL sqlite source (http://www.sqlite.org/sqlite-2.8.0.tar.gz)
! and extract it into c:\mingw\sqlite
!
! 5. start the msys.bat and cd to /home/drh/sqlite and ./configure with mingw/msys
!
! 6. edit src/os.h, go to ~ line 90 (behind the #ifndef OS_UNIX block) and add
!
! #define OS_WIN 1
! #define OS_MAC 0
! #define OS_UNIX 0
!
!
!
! to the source to force the os type. I don't know why but the os type isn't guessed right and redefined in the os.h... Whatever, force it ;) The defines from the makefile don't work.
!
! 7. call mingw32-make to compile! make isn't used anymore (see http://www.mingw.org/mingwfaq.shtml#faq-mingw32-make.exe)
!
!
! 8. create a file called sqlite.def which contains
!
! EXPORTS
! sqlite_open
! sqlite_close
! sqlite_exec
! sqlite_last_insert_rowid
! sqlite_error_string
! sqlite_interrupt
! sqlite_complete
! sqlite_busy_handler
! sqlite_busy_timeout
! sqlite_get_table
! sqlite_free_table
! sqlite_mprintf
! sqlite_vmprintf
! sqlite_exec_printf
! sqlite_exec_vprintf
! sqlite_get_table_printf
! sqlite_get_table_vprintf
! sqlite_freemem
! sqlite_libversion
! sqlite_libencoding
! sqlite_changes
! sqlite_create_function
! sqlite_create_aggregate
! sqlite_function_type
! sqlite_user_data
! sqlite_aggregate_context
! sqlite_aggregate_count
! sqlite_set_result_string
! sqlite_set_result_int
! sqlite_set_result_double
! sqlite_set_result_error
! sqliteMalloc
! sqliteFree
! sqliteRealloc
! sqlite_set_authorizer
! sqlite_trace
! sqlite_compile
! sqlite_step
! sqlite_finalize
!
! 9. dllwrap --dllname sqlite.dll --def sqlite.def *.o
! (or if this doesn't work, dllwrap --def sqlite.def -v --export-all --driver-name gcc --dlltool-name dlltool --as as --target i386-mingw32 -dllname sqlite.dll -lmsvcrt *.o)
!
! 10. strip sqlite.dll
!
! 11. Ready.
!
! ====
! *Win32 recompile with borland c++ builder*
!
! 1. Download preprocessed source from http://www.sqlite.org/sqlite_source.zip
!
! 2. Unzip the source to a project directory, e.g. C:\sqlite
!
! 3. Fire up your borland c++ builder and create a new dll project, plain C without mfc or something like that
!
! 4. Save the project as (e.g.) C:\sqlite\sqlite.bpr
!
! 5. Add the sqlite source files from c:\sqlite to the project
!
! 6. Remove the unit1.* files from your project
!
! 7. Even if .def files are not the clean way, it will be easier than rewriting the sourcecode. Create the file sqlite.def with the following content and add it to the project:
!
! LIBRARY sqlite.dll
! EXPORTS
! sqlite_open = _sqlite_open
! sqlite_close = _sqlite_close
! sqlite_exec = _sqlite_exec
! sqlite_last_insert_rowid = _sqlite_last_insert_rowid
! sqlite_error_string = _sqlite_error_string
! sqlite_interrupt = _sqlite_interrupt
! sqlite_complete = _sqlite_complete
! sqlite_busy_handler = _sqlite_busy_handler
! sqlite_busy_timeout = _sqlite_busy_timeout
! sqlite_get_table = _sqlite_get_table
! sqlite_free_table = _sqlite_free_table
! sqlite_mprintf = _sqlite_mprintf
! sqlite_vmprintf = _sqlite_vmprintf
! sqlite_exec_printf = _sqlite_exec_printf
! sqlite_exec_vprintf = _sqlite_exec_vprintf
! sqlite_get_table_printf = _sqlite_get_table_printf
! sqlite_get_table_vprintf = _sqlite_get_table_vprintf
! sqlite_freemem = _sqlite_freemem
! sqlite_libversion = _sqlite_libversion
! sqlite_libencoding = _sqlite_libencoding
! sqlite_changes = _sqlite_changes
! sqlite_create_function = _sqlite_create_function
! sqlite_create_aggregate = _sqlite_create_aggregate
! sqlite_function_type = _sqlite_function_type
! sqlite_user_data = _sqlite_user_data
!
!
! sqlite_aggregate_context = _sqlite_aggregate_context
! sqlite_aggregate_count = _sqlite_aggregate_count
! sqlite_set_result_string = _sqlite_set_result_string
! sqlite_set_result_int = _sqlite_set_result_int
! sqlite_set_result_double = _sqlite_set_result_double
! sqlite_set_result_error = _sqlite_set_result_error
! sqliteMalloc = _sqliteMalloc
! sqliteFree = _sqliteFree
! sqliteRealloc = _sqliteRealloc
! sqlite_set_authorizer = _sqlite_set_authorizer
! sqlite_trace = _sqlite_trace
! sqlite_compile = _sqlite_compile
! sqlite_step = _sqlite_step
! sqlite_finalize = _sqlite_finalize
!
!
! 9. Fire up the compiler.
!
! 10. Ready.
!
!
! ====
! *Mac OS X build*
!
! I used the standard Unix build instructions...
!
! $ tar xzf sqlite.tar.gz Unpacks into directory named "sqlite"
! $ mkdir bld Create a separate build directory
! $ cd bld
! $ ../sqlite/configure --disable-shared
! $ make Builds "sqlite" and "libsqlite.a"
! $ make test Optional: run regression tests
!
! *But* don't forget the implied
!
! $ make install
!
! step!
!
! The --disable-shared option is required for Mac OS X because libtool
! is busted and will generate an invalid shared library.
!
! The usability of the sqlite shell is greatly enhanced if you have readline support. If you install GNU readline first, sqlite will link to it automatically.
!
! ====
!
! Under AIX 4.3.3 with gcc
!
! fmedico <at> yahoo.com
!
! mkdir sqlite
! cd sqlite
! unzip ../sqlite_source.zip
! rm tclsqlite.c libsqlite.a sqlite 2> /dev/null
! for i in *.c; do gcc -g -O2 -c $i; done
! rm shell.o
! ar cr libsqlite.a *.o
! ranlib libsqlite.a
! gcc -o sqlite shell.c libsqlite.a
!
! ====
!
! *Cygwin*
!
! 1. Run configure
!
! 2. edit src/os.h, go to ~ line 90 (behind the #ifndef OS_UNIX block) and add ala mingw solution above
!
! #define OS_WIN 1
! #define OS_MAC 0
! #define OS_UNIX 0
!
! A similar change has already been checked into the CVS tree and should
! appear with release 2.8.6.
!
! ===
!
! *Boost.Jam*
!
! This assumes you're a C++ type who likes http://boost.org
!
! Haven't gotten into the tcl interface, so the C_SOURCES variable bears
!
! inspection.
!
!
!
! Acquire boost, and boost jam.
!
! Navigate to <boost path>/libs
!
!
!
! mkdir sqlite
!
! cd sqlite
!
! mkdir src
!
! mkdir build
!
! cd src
!
! <unzip the sqlite source code here>
!
! cd ../build
!
! <save the following text as Jamfile>
!
! # (C) Copyright 2002. Permission to copy, use, modify, sell and
!
! # distribute this software is granted provided this copyright notice appears
!
! # in all copies. This software is provided "as is" without express or implied
!
! # warranty, and with no claim as to its suitability for any purpose.
!
! #
!
! #
!
! # Boost.sqlite build
!
! #
!
! # To run all tests quietly: jam test
!
! #
!
! # Declares the following targets:
!
! # 1. sqlite, a library to be linked with all
!
! # Boost.sqlite modules
!
! #
!
! # declare the location of this subproject relative to the root
!
! subproject libs/sqlite/build ;
!
!
!
! # Base names of the source files for libboost_sqlite
!
! C_SOURCES = attach auth btree btree_rb build
!
! copy delete expr func hash
!
! insert main opcodes os pager
!
! parse pragma printf random select
!
! table tokenize trigger vdbe where
!
! update util vacuum
!
! ;
!
! EXE_ONLY = shell
!
! ;
!
!
!
! dll sqlite : ../src/$(C_SOURCES).c
!
! : <sysinclude>$(BOOST_ROOT)
!
! : debug release
!
! ;
!
!
!
! lib sqlite : ../src/$(C_SOURCES).c
!
! : <sysinclude>$(BOOST_ROOT)
!
! : debug release
!
! ;
!
!
!
! exe sqlite : ../src/$(C_SOURCES).c ../src/$(EXE_ONLY).c
! : <sysinclude>$(BOOST_ROOT)
- : debug release
- ;
! Now you can just build sqlite along with the rest of boost. Tested on VC7.1 and GCC 3.3.1. Boost jam builds debug, release, static, and dynamically linked targets with a lack of fuss and
! bother.
--- 91,116 ----
rc = SQLITE_BUSY;
}else{
+#endif
! terface adding patch-sets, bug tracking, and Wiki
! to CVS. http://www.hwaci.com/sw/cvstrac/.
! *: SQL Relay: A persistent database connection pooling, proxying and load
! balancing system with APIs for a wide range of programming
! languages. http://www.firstworks.com/
! --> http://sqlrelay.sourceforge.net
+ *: Zee Cookbook: A cookbook application for Sharp Zaurus PDA.
+ hb interface adding patch-sets, bug tracking, and Wiki
+ to CVS. http://www.hwaci.com/sw/cvstrac/.
+ *: SQL Relay: A persistent database connection pooling, proxying and load
+ balancing system with APIs for a wide range of programming
+ languages. http://www.firstworks.com/
+ --> http://sqlrelay.sourceforge.net
! *: Zee Cookbook: A cookbook application for Sharp Zaurus PDA.
! h
Small. Fast. Reliable.
Choose any three.
Choose any three.
|
|